Air-Eagle XLT Analog Systems by BWI Eagle provide continuous, reliable transmission of analog 4-20mA, 0-5VDC and 0-10VDC, as well as digital/relay signals and alarms for the process control industry. Our analog/digital wireless remote control products have been successfully implemented in various applications, including temperature measurements, 4-20mA bridges, discreet inputs/outputs, pulse inputs, lighting, pump controls and variable frequency drives.
Systems are available with one-way or two-way communication and various fully isolated analog/digital (discreet) inputs and outputs that can communicate up to two miles. The ability to monitor and control reduces costs by removing the need for separate units. User-selectable frequencies allow multiple systems to be used in the same area without interference.
- Up to a two-mile operating range
- Simple plug-and-play design
- Eight independent network frequencies
- One-way or two-way communication
- Operates on 900 MHz band
- Convert the handheld digital button command to an analog proportional output
- Real-time status feedback from the remote site
- Proudly manufactured in the USA
- AC, DC or battery-powered
-
Configuration Sheets
Plug-and-Play
Hook up your wiring, and you’re ready to monitor and control your processes without any complicated programming
Frequency
900 MHz spread spectrum
I/O Control
- Analog inputs: 4-20mA, 0-5VDC, 0-10VDC
- Digital inputs: dry contact, 120VAC, 5-24VDC
- Analog outputs: 4-20mA, 0-5VDC, 0-10VDC
- Digital outputs: dry contact relay rated up to 5amps
RF Networks
Eight independent network frequencies
Operating Range
- Standard operating range up to 2,500 feet
- Extended operating range up to two miles with high-gain antennas and repeaters
RF Output Power
250 mW
Operating Temperature
-40° F to +185° F (-40° C to +85° C)
Housing & Protection
Varies by model
- IP66-rated, (NEMA 4) polycarbonate enclosure
- Hinged fiberglass with window (NEMA 4, 12, 13) enclosure
Power
AC, DC and battery-powered models
Relay Operation Mode
Models come standard with two relay operation modes – maintained momentary and toggle latching
Custom Programming
Can be custom-programmed for any combination of relay operations, including but not limited to:
- Maintained momentary
- Toggle latching
- Latching
- Dual relay activation
- On or Off delay timers
Frequently Asked Questions
