BWI Air-Eagle XLT Plus Wireless Remote Control

BWI Air-Eagle XLT Plus Transceivers

BWI Air-Eagle XLT Plus Wireless Remote Control

BWI Air-Eagle XLT Plus Transceivers

Air-Eagle XLT Plus Transceivers by BWI Eagle combine the functionality of a transmitter and receiver to provide real-time status of your remote operation. Each industrial remote control unit comes equipped with input and output channels, transmitting information and receiving a confirmation that the operation was performed.

Transceivers can communicate with other transceivers up to ten miles. Multiple transceivers can be combined to create a uniquely tailored system for each application. Three, four or eight input and output channels allow you to control and receive the status of several remote stations.

The default relay operation is maintained momentary, meaning the relay will remain energized while the button is pressed. Units can also be switched to a preconfigured toggle latching relay mode. All transceivers can be custom-programmed for other relay operations.

  • Up to a ten-mile operating range
  • Three, four or eight input and output channels
  • Operates on 900 MHz band
  • Eight independent network frequencies
  • AC and DC-powered models
  • Proudly manufactured in the USA
  • Custom programming is available for a variety of relay operations

 

Transceivers Product Guide

Have Questions?

Contact Us

Frequency

900 MHz spread spectrum

Input Channels

Three, four or eight input and output channels

Relay Contacts

SPDT 5 amp @ 120VAC or 30VDC

RF Networks

Eight independent network frequencies

RF Output Power

1 watt

Operating Range

  • Standard operating range up to 5,000 feet
  • Extended operating range up to ten miles with high-gain antennas and repeaters

Operating Temperature

-40° F to +185° F (-40° C to +85° C)

Housing & Protection

Varies by model

  • IP66-rated, (NEMA 4) polycarbonate enclosure
  • Hinged fiberglass with window (NEMA 3) enclosure

Power

AC or DC-powered models

Relay Operation Mode

Models come standard with two relay operation modes – maintained momentary and toggle latching

Custom Programming

Can be programmed for any combination of relay operations including but not limited to:

  • Maintained momentary
  • Toggle latching
  • Latching
  • Dual activation
  • On or Off delay timers

Frequently Asked Questions

Read the answers to common questions about BWI Eagle products.

Bwi Eagle 491103 accessory

49-1103

Antenna | TNC portable rubber duck

49-1103
Bwi Eagle 492201 accessory

49-2101

Antenna | mobile, thru-hole/bracket mount, 17′ coax cable

49-2101
Bwi Eagle 492202 accessory

49-2102

Antenna | mobile, magnet mount, 12′ coax cable

49-2102
Bwi Eagle 493101 accessory

49-3101

Antenna | Omni directional base antenna

49-3101
Bwi Eagle 493102 accessory

49-3102

Antenna | Yagi directional base antenna

49-3102
Bwi Eagle 495004x accessory

49-5004-X

Antenna | bulkhead extension cable

49-5004-X
Bwi Eagle 4614500ac industrial remote control

461-4500

Signal repeaters | up to a ten-mile operating range

461-4500-AC 461-4500-DC

Contact Us