Remtron™ PatriotPro is the hero of the Remtron industrial remote control product line. PatriotPro builds on the rugged design and distinctive feel of the time-tested features of the legacy Patriot system with advanced, future-ready technology and a new look.
What sets the PatriotPro apart is its versatility. In addition to standard configurations, it can be engineered to meet specific application requirements. It can control up to 18 commands, providing operators with more control options and greater flexibility. Multiple LEDs, haptic feedback, an illuminated PL-d stop switch and a distinctive click indication between the first and second steps make operating it easier than ever.
PatriotPro utilizes the CattronLink™ wireless programming tool for performance and feature updates. Essential data and diagnostics are logged and available. Wireless closed box configuration of frequency and function allows for simple and rapid deployment of spare transmitters. In addition, PatriotPro uses black channel communication to ensure the security of transmitted signals.
- Available in standard configurations
- Can be customized to meet application-specific needs
- Three MCU configuration, First Come First Serve (FCFS) and Pitch and Catch features are available on sub-GHz models
- LEDs, haptic vibration and a distinctive click indication for operator feedback
- Illuminated PL-d stop switch
- Black channel communication secures signals
- CattronLink software management tool
- RFID security and rapid configuration
- Global licensed and unlicensed frequencies
- Direct replacement for the legacy Patriot system.
- Backward compatible with the legacy Patriot and CommandPro MCUs
- Works with the 10R/17R MCU, 11R MCU, XBMCU, CBMCU and CattronLink™
-
Datasheets
-
User Manuals
-
Quick Start Guides
-
Configuration Sheets
-
Accessory Sheets
-
Solution Cards
-
Miscellaneous
Protection
IP65-rated – Read about IP ratings
Housing
High-impact, fiber-reinforced nylon
Operating Range
Up to 600 feet
Standard Configurations
- 25S11PRO: 3 motion/2 speed + alarm
- 25S15PRO: 3 motion/2 speed, A/B/Both Hoist Select + alarm
- 25S11PRO4A: 3 motion/2 speed, 4 auxiliary controls + alarm
- 25S15PRO4M: 3 motion/2 speed, 1 motion/1 speed, Lights, and A/B/Both Hoist Select + alarm
- 25S15PRO2A: 3 motion/2 speed, 2 auxiliary controls, Lights, and A/B/Both Hoist Select + alarm
- 25S15PRO2MCU (sub-GHz only): 3 motion/2 speed, 3 auxiliary controls, Lights, and A/B/Both Hoist Select with 2 dedicated receivers for trolley/hoist, and bridge + alarm
- 25S15PRO3MCU (sub-GHz only): 3 motion/2 speed, 3 auxiliary controls, Lights, and A/B/Both Hoist Select with 3 dedicated receivers for trolley, hoist, and bridge + alarm
- 25S11PROPC (sub-GHz only): 3 motion/2 speed, 3 auxiliary controls, Pitch and Catch feature + alarm (Does not include a spare – programmed OCU A and OCU B)
- 25S15PROPC (sub-GHz only): 3 motion/2 speed, 2 auxiliary controls, A/B/Both Hoist Select, Pitch and Catch feature + alarm (Does not include a spare – programmed OCU A and OCU B)
- 25S11PROFCFS (sub-GHz only): 3 motion/2 speed, 3 auxiliary controls, A/B/Both Hoist Select, FCFS Feature + alarm (Does not include a spare – programmed OCU A and OCU B)
- 25S15PROFCFS (sub-GHz only): 3 motion/2 speed, 2 auxiliary controls, FCFS Feature + alarm (Does not include a spare – programmed OCU A and OCU B)
Three MCU Configuration
One OCU to one Bridge MCU and two Trolley Hoist MCU for festoonless cranes (sub-GHz only)
First Come First Serve (FCFS)
Allows use of multiple transmitters with one receiver, one at a time. When the receiver receives a valid signal, it stops scanning and responds only to that transmitter’s signal. When the signal is no longer being received (i.e., the transmitter has been turned off or is out of range, or the operator initiates a release), the receiver again scans until another valid signal is received. (sub-GHz only)
Pitch and Catch
A method used to transfer control from one operator to another without pausing the operation. The “Pitch” operation initiates the transfer of control from OCU A. OCU A then enters passive mode without shutting down the machine. OCU B may then “Catch” control of the machine by moving into active mode (sub-GHz only)
Black Channel Communication
PL-d safety level based on black channel telegram for both control and feedback and a redundant dual-processor architecture
Battery Type
- Rechargeable battery pack
- AA standard alkaline batteries; lasts beyond 65 hours with typical use
CattronLink Management Software
CattronLink enables continuous performance and simplifies configuration and feature upgrades via desktop or mobile app
Enhanced Status Indicators
Multiple LEDs, haptic vibration and distinctive click indication between the first and second steps
Closed Box Configuration
Wireless configuration of frequency and function enables simple and rapid deployment of spares
RFID Security and Rapid Configuration
Allocate user ID security and “as needed” reconfiguration of the operator control unit to a specific machine
PL-d Safety Level
PL-d Safety level in compliance with ISO 13849
Diagnostic Data Collection
Data and diagnostics are logged and available
AB Selector Switch
Allows an operator to switch between trolley and hoists that are operated on a single bridge
Private Label
Ability to customize the label of the OCU to include your brand or specific application identity
Rechargeable Docking Station
Standard desk mount or optional wall mount adapter
Leather Holster
PRT-0002629: Black leather holster to secure your Remtron PatriotPro transmitter
Shoulder Strap
42C-0057: Adjustable black shoulder strap to secure the leather holster
Label Kit
3LBL-9005-A001: standard label insert kit for the Remtron PatriotPro transmitter
Rechargeable Docking Station
2OPT-9597-A001: Standard desk mount or optional wall mount adapter with rechargeable batteries; AC-powered model
2OPT-9597-A002: Standard desk mount or optional wall mount adapter with rechargeable batteries; DC-powered model
