Air-Eagle SR Plus Transceivers by BWI Eagle combine the functionality of a transmitter and receiver to provide real-time status of your remote operation. Each industrial remote control unit comes equipped with input and output channels transmitting information and receiving a confirmation that the operation was performed.
Transceivers can communicate with other transceivers up to 600 feet. Multiple transceivers can be combined to create a uniquely tailored system for each application. One, two, four or eight input and output channels allow you to control and receive the status of several remote stations.
The default relay operation is maintained momentary, meaning the relay will remain energized while the button is pressed. Units can also be switched to a preconfigured toggle latching relay mode. All transceivers can be custom-programmed for other relay operations.
Our systems offer a cost-effective solution in applications where running electrical cables is impractical, impossible or too expensive. To see product options, view the Transceiver Product Guide.
- Up to a 600-foot operating range
- One, two, four or eight input and output channels
- Operates on 2.4 GHz band
- Single or multiple channels
- Eight independent network frequencies
- AC and DC-powered models
- Proudly manufactured in the USA
- Read the BWI Eagle FAQs
- Custom programming is available for a variety of relay operations
- View the Transceiver Product Guide to see product options
-
User Manuals
-
Configuration Sheets
Frequency
2.4 GHz spread spectrum
Input Channels
One, two, four or eight input and output channels
Relay Contacts
SPDT 5 amp @ 120VAC or 30VDC
RF Networks
Eight independent network frequencies
RF Output Power
60 mW
Operating Range
Standard operating range up to 600 feet
Operating Temperature
-40° F to +185° F (-40° C to +85° C)
Housing & Protection
Varies by model
- IP66-rated, (NEMA 4, 12, 13) polycarbonate enclosure
- Hinged fiberglass with window (NEMA 4, 12, 13) enclosure
Power
AC and DC-powered models
Relay Operation Mode
Models come standard with two relay operation modes – maintained momentary and toggle latching
Custom Programming
Can be programmed for any combination of relay operations, including but not limited to:
- Maintained momentary
- Toggle latching
- Latching
- Dual activation
- On or Off delay timers
Frequently Asked Questions
