TOUGH Series™
TG410
The DynaGen™ TOUGH Series™ TG410 is an autostart digital controller designed for complete control, protection, and engine instrumentation on generators.
HIGHLIGHTS
-
Three phase volt metering for generator applications
- Tier 4F and Euro Stage V compliant
- Easily configured using the front panel or the RapidCore™ configurator software
- Ideal for applications where reliability is critical, such as mobile or stationary engine equipment or generators
- Modbus port with galvanic isolation
- Available as a Plug-N-Play complete package
- OEM private label branding available
- Five-year or 17,500 hour warranty
Display Features
Oil pressure, engine temperature, fuel and oil levels, hour meter, RPM, battery voltage, real time clock with date/time, J1939 DTC codes, DPF and DEF status icons, J1939 percent load and percent torque, custom screens for pumping or compressor applications and power factor, apparent power, real power and reactive power metering for generator applications
Functions
Built-in weekly scheduler, maintenance counter, preheat and many configurable timers, stall detection, retry on false start, custom warnings and failures, Configurable Diagnostic Trouble Code (DTC), load imbalance detection and IDMT overcurrent protection, exercise clock and 150 event logs
Rugged Housing
Conformally coats for protection against moisture and contaminants. Front panel gasket for panel water ingress protection
Autostart
Autostart on low battery, automatic shutdown and warnings, manual and remote start, and autostart trigger on sensor value (pressure, temperature, level voltage)
Speed Control
Speed control offset adjustment for electronic engines, RPM via J1939, magnetic pick-up or generator and configurable setpoint RPM output feature
Closed Loop Control
Closed loop control on custom senders
Senders
Accepts common senders (VDO, Datcon, Murphy and more)
Modbus Communication
RTU slave mode, RS485 port (9600, 19200, 38400, 57600 baud)
Switch Inputs
Single or dual float switch input control
Engine Support
Supports mechanical or CANbus J1939 engines
ISO Certification
Manufactured in an ISO 9001:2015 certified operation
Warranty
Five-year warranty or 17,500 hours
RelayPak
Snap on RelayPak eliminates the need to mount and wire external slave relays for fuel crank and up to two other loads
Monitoring
RemoteIQ remote monitoring and control available with cellular modem
Heater LCD
Heated LCD version available for operation and display down to -40 C
Mimic Panel
TR100 is available for TG350 and TG410 controllers and mimics what is displayed on the controller.
On-Highway Mobile Equipment
Vacuum Trucks, Loader Cranes, Specialty Trucks, Concrete Pumps, Pressure Washing Trucks
Off-Highway Mobile Equipment
Light Towers, Fire Pumps, Generators, Dewatering Pumps, Terrain Cranes, Crawler Cranes, Rock Breakers, Screen Machines
General Equipment Rental
Construction Equipment, Concrete Pumps, Cranes
Specialty Equipment Rental
Pumps, Tanks, Power Generation, HVAC, Heat
Extraction & Fracking
Generators, Light Towers, Tanks
Water Transport
Dewatering, Bypass, Gas Transport
Crop Monitoring
Frost Protection
Irrigation
Irrigation Pumps, Lead Monitoring
Generators
Wind Machines, NG Compressors, Blow Off Preventers, Well Head Drills, Standby Gensets, Off-Grid Power, Solar Backup Systems, Pleasure Craft Generators, Coastal Fishing Drive and Gen, Coast Guard Vessel Gen and Pump, Main Drive Overspeed Protection
RelayPak with 40A cube relays
RP100-VM
RelayPak w/12VDC Relays
TG Main I/O Harness
DWG1476
4' TG Main I/O Harness
TG Main I/O Harness for RelayPak
DWG1475
4' TG Main I/O Harness (RP100)
TG 3 Phase AC Volts Harness
DWG1479
4' TG 3Ph AC Volts Harness
TG Mag/CANbus Harness
DWG1478
4' TG Mag/CANbus Harness
TG Advanced I/O Harness
DWG1477
4' Advanced I/O Harness
TG Mag/CANbus/Modbus Harness
DWG1522
4' TG Mag/CANbus/Modbus
TG 3 Phase AC Current Harness
DWG1518
4' TG 3Ph AC Current Harness
TOUGHSeries Steel Enclosure
ENC0080
TOUGH Series Steel Enclosure
TG Steel Enclosure
ENC0084
TG steel enclosure
Current Transformers
ACC0045
100A:5A Current Transformer 1.1" I.D.
Current Transformers
ACC0046
200A:5A Current Transformer 1.1" I.D.
Current Transformers
ACC0047
300A:5A Current Transformer 1.1" I.D.
Current Transformers
ACC0048
500A:5A Current Transformer 1.1" I.D.
Current Transformers
ACC0049
600A:5A Current Transformer 1.1" I.D.
Current Transformers
ACC0050
1000A:5A Current Transformer 1.1" I.D.
Current Transformers
ACC0057
1500A:5A Current Transformer
Current Transformers
ACC0067
2000A:5A Current Transformer
12V Cube Relay
RLY0053
12VDC 40A UL Relay
24V Cube Relay
RLY0054
24VDC 40A UL Relay
ACC0084
USB Cable 6.5' A Male - B Male
Oil Press Sender
ACC0108
100PSI 1/8 or 3/8" Oil Prs Snd
NPTF Temp Sender
ACC0027
280F 1/8”-27 NPTF Temp Sender
ACC0098
280F 3/8”-18 NPTF Temp Sender
ACC0099
280F 1/2”-14 NPTF Temp Sender
Wire Extraction Tool
ACC0097
16-28AWG Wire Extraction Tool
5' Pre-Crimped Wires
DWG1410
5' GSC400 Pre-crimped Wires(5)
RA400
RA400-LS
NFPA110 Remote Annunciator
Pull Box
ACC0109
RA400 8x8x4" Type 1 Pull Box
ACC0120
120VAC to 24VDC Power Adaptor