Download PDF Literature

Equipment operators agree that the Cattron-Theimeg Paddle-type controller is perfect for heavy industrial applications. Designed with both operators and maintenance personnel in mind, this heavy-duty controller is ideal for indoor and outdoor use. It is very easy to use, as most of the controls have been modeled after those commonly found in crane cabs. In addition to cranes, the paddle controller can also be used for railroad, military, and other industrial applications.

The Paddle controller uses advanced microcomputer electronics and surface-mount technology. It can be used with all Cattron-Theimeg AT or MP Series receiver/decoder units and can be utilized with existing systems as either a replacement or spare controller. A variety of synthesized and crystal-controIled RF transmitter configurations can be provided, allowing operation in the VHF and UHF licensed and non-licensed radio channels.

The Cattron-Theimeg Paddle controller consists of an encoder circuit board that uses industrial-grade mil-spec digital components, a powerful microcomputer and a sophisticated operating software code. All components are protected by a thick-walled, epoxy-coated extruded aluminum case. The ends of the housing are rubberized metal plates that make shock absorbing end "bumpers."

Standard Paddle controllers have room for up to six paddles, and can be customized with additional push-buttons and toggle switches. In addition, all functions are identified by durable, custom-engraved nameplates. Paddle controllers are field-tested and have been proven under extreme conditions. Total water and dust sealing makes them suitable for indoor and outdoor operation.

When the operator first turns the power switch on, a sophisticated self-test routine monitors the motor function switches to detect a broken wire or a defective switch. All motor function lever switches are tested for neutrality and a small speaker beeps when the test is complete. If a motor function switch failure occurs, it is recognized as a problem and "locked out" from any further input. A special message is sent to the receiver/decoder to advise maintenance personnel of the problem. The message is both displayed and stored in the datalog of the controller's decoder.

A full length safety bar is provided to function as an enabling device to all lever switches. It is a large full length switch that is easily and naturally activated by the palm of the operator's hand any time he places his hand into position to move the lever switches. This push-to-operate (PTO) safety bar will electronically disconnect all lever switches when it is released, thus stopping motion commands from these switches. This feature is programmable. Certain applications may have some lever switches removed from the control of the PTO bar.

Cattron-Theimeg Paddle controllers are equipped with a tilt switch to activate diagnostics and can be optionally programmed to send a function. This function can be assigned in the decoder for a variety of operations, i.e., to stop the equipment, sound an alarm or both. Every Paddle controller may also be equipped with an optional PC-compatible diagnostic port.

Cattron-Theimeg Paddle controllers are powered with disposable Alkaline or rechargeable Ni-Cad batteries. In normal operation, a green LED blinks with each function command message. For added safety and improved performance, the operating voltage is regulated over the entire battery life, insuring constant range and reliable operation. Whether you choose disposable or rechargeable batteries, changing the battery is easy - simply open the gasketed battery cover, drop the battery in place and close the cover. There are no wires or connectors to insert into the battery.

• For use with any Cattron-Theimeg AT or MP Series System
• Customized layout with custom-engraved nameplates
• Rugged design for use in harsh environments
• Power-on self-diagnostics
• Two stage LED battery indicator with audible beep.
• Long battery life; full voltage regulation over life of the battery
• State-of-the-art industrial grade components and advanced microcomputer technology
• Rugged, epoxy-coated extruded aluminum case
• Rubberized metal end caps to absorb heavy shocks
• Full-length push-to-operate (PTO) safety bar
• Designed for easy servicing

Dimensions: Approx. 5.9" x 9.5" x 6.7 (15 cm x 24 cm x 17 cm)

Weight: Approx. 6 lbs (2.72 Kg); standard three paddle unit with battery pack

Number of Functions: Up to six motions, single or dual axis; and up to 15 on/off functions; additional on/off functions can be used in lieu of motor groups

Switch Type: Spring return to center

Switch Options: A wide variety - paddles (single axis), joysticks (dual axis), toggle switches, and push-buttons

Keylock Switch: Optional (power on/off)

Tilt Switch: Used for diagnostic activation or programmable message sending; 60º front/back, 45º side / side activation

Antenna: Internal or external

Environmental: -22ºF to +140ºF (-30 ºC to +60 ºC) for indoor and outdoor use

Battery Voltage: 12.5 VDC nominal

Radio Transmitters: UHF & VHF, pulsed packet

Type Approvals: USA, Canada, and UK; for a complete listing, contact the factory

Power Output: Variable - dependent upon application and licensing limitations

Emission/Modulation: 14KOF1 D +/- 5Khz for 100%, or 9K3FID

RF Operating Range: From approximately 300 ft (93 m) to 1650 ft (500 m). These distances assume line of sight operation and are dependent on power, frequency, antenna, and type of receiver/decoder used.

Battery Selection: Long-life Alkaline or rechargeable Ni-Cad. Battery life dependent upon application. Please consult a CATTRON representative for additional information.

*Specifications subject to change without notice.