MP
96 - Mega Power
Download
PDF Literature
The
MP 96 represents the “top of the line” offering the
safety and dependability required for operating machinery in harsh,
industrial environments. The “MP” stands for “Multi-Processor”
which means more power and configuration possibilities.
Operational
Features
• Compatible with previous Cattron-Theimeg systems
• Solid State, Proportional/Analog, and Electromechanical
interfacing capabilities
• Up to 48 inputs and 96 outputs allow for complete customization
• Multiple operators may use a single frequency (RF version
only)
• Long " ride through" time during power supply
interruptions
• Can be used by simultaneous and supervisory operators
• Responds rapidly to operator commands
• Optional external event monitoring of machine functions
• Extensive data logging of remote machinery activity
Safety
Features
• Verification of output commands through external monitoring
• Two stage Automatic Safety Override (ASO) disables only
the faulty portion of the machine control
• High message data security with data error checking (BCH)
• Simultaneous and independent data signal processing of
all incoming commands by two separate microprocessors
• Two separate outputs for mainline control
• Extensive EMI/RFI protection
• Can maintain safe control through brownouts and surges
• Complete diagnostics on power-up
• Individually fused and isolated outputs
• Separated mainline controls for each motor group
• Allows for low voltage pendant operation in high voltage
situations
• Multiple watchdog timers ensure no motion is carried out
without command
Functional
Features
• Easy to read two line backlit system status display showing
normal and fault conditions
• Customizable data-log and real time computer monitor capability
• Data collection via remote control or externally monitored
system inputs for preventative maintenance
• Systems provided with a completely customized installation,
troubleshooting, and maintenance manual
• Accessible components allow for ease of maintenance
• Can be used with a variety of existing interfaced devices
and a wide variety of AC/DC powered equipment
• Suitable for hydraulic, VFD, pneumatic, electrical, automated
and semi-automated control system applications.
• Can be configured with a variety of controller (transmitter)
types
Options
• Pitch&Catch, Range Limiting, Close Start™, TALKBACK™
• PC compatible diagnostic software
• Stepless output for smoother operation
• “Snapshot” datalog
Specifications
• Outputs: 1-96 independent and/or simultaneous, plus Mainline
On/Off
• Enclosure: NEMA 12 (IP65) standard dust, oil & water
tight; NEMA 4 and 4X (IP66) optional
• Environmental: Approx. -4°F to +140°F ( -20°C
to +60°C); RH 0 to 95%, non condensing; special temperature
units available
• Sub Chassis: Receiver/decoder and power supply each have
their own magnetic compliant (EMC) shielded compartment; entire
sub chassis mounts on inside door of NEMA 12 (IP65)
enclosure; no relays in sub chassis
• Control Voltage Range: 30 VDC or 12-250 VAC fused @ 5
amps (higher voltages with derated current); Stepless: 0-80V BiPolar
Maximum
• Power Requirements: 32/48/110/220 VAC 50-60 Hz or 13.7
VDC +/- 10% @ less than 1 amp; Optional 12 to 250 VDC power supplies
available
• Receiver Frequency: (Crystal & Synthesized): UHF/VHF
• Microcomputer Speed: 12 MHz
• Memory Size: Two E Proms each with 64K bytes memory (programmed
by Cattron-Theimeg)
• Datalog Memory Size: 64K bytes
• Optional Diagnostic Port: RS232C (DB25 Connector) or RS422
(MIA Connector)
